Blumat Blumat for Houseplants XL Set, 2 items

The Blumat Classic XL is an easy-to-install watering method for your houseplants. It offers the ideal holiday watering, so your plants won't suffer in your absence. However, Blumat Classic can also be easily used year-round and ensures that your plants are always supplied with sufficient water.

• Evenly water indoor plants
• Quick and easy installation
• Can be used temporarily or year-round
• Functions without a water connection or electricity
• Even water delivery thanks to the porous clay cone
• Water delivery per day: freely selectable between 75 ml and 125 ml
• 100 cm long hose included

Application:

1. Pull off the green cap and place the clay cone in a container of water for 15 minutes.
2. Fill the cone to the brim with water and press the green cap firmly back on
3. Push the clay tip of the Blumat Classic into the soil. (For larger pots, use 2 pieces and for elongated boxes use 1 piece every 15-20 cm).
4. Now put the suction hose in a full container of water and make sure that it reaches the bottom of the container.
5. For optimum water supply, the water level in the water vessel must be below the green Blumat cap.
6. The amount of water can be increased or decreased depending on the height of the water level.

Instructions:

1. Pull off the green cap
2. Place the ceramic cone in water (15min)
3. Fill with water up to the brim
4. Place the green cap firmly on again.
5. Place the Blumat pointy-tip down into your planter. For larger pots, use two Blumats. Use 1 Blumat every 15-20cm per planter. Make sure that the Blumat has good contact with the soil.
6. Immerse the hose in a vessel full of water.
7. The hose must reach the bottom of the vessel.
8. The green cap has to be higher than the water vessel water level.
9. Raising or lowering the height of the planter increases or decrease the amount of water released.